Active Oxygen Based Instrument Disinfectant for Manual Cleaning And Disinfection

Product Description

Application areas

Universal cleaning and disinfection of thermostable and thermolabile medical instruments of all types. Particularly suitable for flexible endoscopes and sensitive materials such as silicone, polycarbonate, polysulfone and acrylic glass. Furthermore, its special formulation is suitable for use in an ultrasonic bath, as well as manual reprocessing and circulation procedures (semi-automatic).

Microbial efficacy :

Product data :

Composition

• 100 g of the granules contains the following active ingredients: 43,0 g Sodium percarbonate, 22,0 g Tetraacetylethylenediamine.
• Labelling according to Regulation (EC) No 648/2004:
• > 30 % oxygen-based bleaching agents, < 5 % non-ionic surfactants, < 5 % phosphates, < 5 % EDTA and salts thereof, enzymes, perfumes.
• Chemical-physical data
• Color:light blue
• Flash point:Not applicable
• Viscosity, dynamic:Not applicable
• Form:granular
• pH:ca. 8 / 20 g/l / 20 °C / in water

Special advice

Instructions for use:

The instrument disinfection granules are diluted with cold water to the desired concentration for use. Dosage: 1.0 % - 2.0 %, depending on microbiological activity. Prepare the solution with the enclosed measuring spoon. Example for use: 10 litres of a 2 % working solution is equivalent to 9.8 litres of water and 200 g gigasept® pearls. Add water and sprinkle in the appropriate amount of granules. Stir several times for the first 15 minutes. After this activation time, the working solution is ready for use. Minor undissolved residues form an active deposit of activity, but do not impair the effectiveness of the solution. Immediately after use, immerse endoscopes and instruments to be reprocessed into the working solution. Ensure complete coverage, including hollow instruments, and allow to act. After instrument reprocessing, rinse/flush thoroughly with water of at least drinking water quality, preferably deionised water, in order to completely remove residues of the disinfectant solution. Please refer to the reprocessing recommendations by the instrument manufacturer. Do not mix with other cleaning products or disinfectants. Not suitable for instruments made of brass and copper, or chrome- or nickel-plated instruments that have been mechanically pre-damaged. Replace working solutions every working day and if contamination is clearly visible. The efficacy can be checked using indicator strips (Article code: 70000746), e.g. for contaminated solution or elevated temperature.

With the addition of specific adjuvants, the pH of gigasept® pearls is buffered within a neutral range. This prevents protein coagulation (binding of proteins on surfaces) and also provides optimal material compatibility.

Carryover of small amounts of application solution from the precleaning is not expected to involve interactions with cleaning agents and disinfection agents from automated endoscope reprocessing (e.g. glutaraldehyde and peracetic acid base).

Information for ordering :

Schulke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.